This is a preview. Please close this window when you are done.

.
UndergraduateGraduateContinuing EducationSpecial ProgramsAboutAdmissionsAlumniStudents

To earn a Bachelor of Fine Arts degree in Interior Design at SVA, students must complete 120 credits as follows:

1. Successful completion of 120 credits, including all required courses, with a basic distribution of at least: 

  • 75 credits in studio art courses that carry a prefix of ADD, AND, CFD, CID, CVD, DSD, FID, IDD, ILD, PHD, SDD, SMD, VND, or VSD.

  • 30 credits in humanities and sciences courses that carry a prefix of HCD, HDD, HHD, HLD, HPD, HSD, HWD or VHD.

Students are required to complete one designated 3-credit course in each of the following areas: history (HHD prefix), literature (HLD prefix), social sciences (HPD prefix), and science (HSD prefix), unless transfer of credit has been awarded. These courses may only be chosen from the specified core curriculum listed in this book as section “R.”  All degree candidates must pass the Proficiency Examination. Please refer to the general humanities and sciences requirements as outlined at the beginning of the humanities and sciences section of this book.

  • 15 credits in art history courses that carry a prefix of AHD or VCD.
     

2. Students must meet all academic and administrative requirements of the BFA Interior Design Department.

3. Students must successfully pass a departmental evaluation of studio work at the end of the fourth year to be conducted either by faculty committee or by the chair.  All students who matriculate in one of the College’s undergraduate degree programs must complete their degree within eight years, unless given an official extension by the director of academic advisement.

First-Year Requirements

IDD-1010 Drafting: Basic Building Systems
IDD-1020 Drawing: Perspective
IDD-1030 Drawing: Environment and Composition
IDD-1050 Principles of Interior Design
IDD-1060 Introduction to Designing Interiors
IDD-1130/IDD-1135  Lecture Series I and II

IDD-1160 Computer-Aided Drafting and Design
IDD-1170 Introduction to Computer Design
IDD-1240 Furniture and Furnishings
HCD-1020/HCD-1025

 Writing and Literature I and II


Second-Year Requirements

IDD-2010 Design Studio I
IDD-2015 Design Studio II
IDD-2020 Color Theory and Rendering
IDD-2030 Building and Interior Systems I 
IDD-2035 Building and Interior Systems II
IDD-2130 Lecture Series III 
IDD-2135 Lecture Series IV
IDD-2140 Interior Materials and Finishes
IDD-2341 Intro to Rhino & Digital Fabrication
IDD-2344 Intro to Revitt: Building Information Models 
AHD-2210 World Architecture: Art & Interior Design
AHD-2220 Western Architecture: Art & Interior Design
HPD-2270 Critical Thinking for Interior Designers I
HPD-2275 Critical Thinking for Interior Designers II


Third-Year Requirements

IDD-3020 Design Studio III
IDD-3025 Design Studio IV 
IDD-3030 Lighting and Specialty Design
IDD-3130 Lecture Series V
IDD-3135 Lecture Series VI
IDD-3150 Sustainable Design
AHD-3360 Modern and Contemporary Interiors
AHD-3370 Influences in Contemporary Interiors 

Fourth-Year Requirements

IDD-4010 Design Studio V: Thesis
IDD-4015 Design Studio VI: Thesis/Portfolio
IDD-4030 Interior Design: Professional Practice
IDD-4040 Practical Applications for the Interior Design Professional
IDD-4130 Lecture Series VII 
IDD-4135 Lecture Series VIII

Interior Design General Course Listing

IDD-2010
Design Studio I
One semester: 3 studio credits
This course will introduce many design issues and principles. Skills will be developed through three-dimensional sketch problems varying in levels of complexity and duration, culminating in a final project for juried presentation. Third-semester interior design related course materials will be incorporated into our explorations. 

IDD-2015
Design Studio II
One semester: 3 studio credits
A continuation of IDD-2010, Design Studio I, students will be given a wide range of projects of increasing levels of complexity and scope to expand design skills. A final juried project will be presented that demonstrates the application of previous course material, including technical and behavioral aspects of design. 

IDD-2020
Color Theory and Rendering
One semester: 2 studio credits
Interior rendering, with an emphasis on drawing perspective and color, is the focus of this course. Sketching and resource courses, as well as foundation studio courses, will be incorporated. Constructing perspectives from plans and elevations and rendering perspectives with a variety of media will be covered. 

IDD-2030
Building and Interior Systems I
One semester: 2 studio credits
The principles and practices of building and interior construction systems will be examined throughout this course. Building construction, interior construction (walls, ceilings, flooring), safety, building codes, barrier-free codes and testing standards will be covered. Visits to interiors under construction will be included when possible; the details of interior design elements will be studied through direct observation and reviewing drawings. Sustainability aspects of building and construction systems will be discussed. 

IDD-2035
Building and Interior Systems II
One semester: 2 studio credits
A continuation of IDD-2030, Building and Interior Systems I, the goal of this course is the development of an overall understanding of the building process and the technical aspects of interior design, including lighting, electrical, plumbing, HVAC, acoustics and conveying systems. Discussions will include sustainable considerations in product and systems design; professional ethics; fees; building laws and codes; project and team management; health, safety and welfare regulations. Professional business practices will be discussed as they relate to the process of design. 

IDD-2130 / IDD-2135
Lecture Series III and IV: Inside the Box
Two semesters: no credit
Students will attend lectures and events offered through the Interior Design Department and professional interior design organizations in New York City. 

IDD-2140
Interior Materials and Finishes
One semester: 2 studio credits
This course will present a broad study of materials and finishes that define our interior environment. The specification, composition, manufacturing processes, construction and application/usability of materials and finishes will be covered. The course will provide a foundation for students to understand, identify, select, specify and apply materials for interiors. Lectures, demonstrations, projects and field trips promote the development of design ideas related to materials with an emphasis on sustainable materials and finishes. The final project will culminate in a fully designed architectural and furniture finish scheme. 

AHD-2210
World Architecture: Art and Interior Design
One semester: 3 art history credits
The different cultures and design theories of Asia, Africa, and Central and South America, and their influences on the West, will be presented in this course. The totality of space, materials, ornament and furnishings will be stressed. 

AHD-2220
Western Architecture: Art and Interior Design
One semester: 3 art history credits
Significant contributions to Western design, both European and American, will be examined in this course. The relationships among social, technological and economic factors will be emphasized, as well as the interdependencies of space, materials, ornament and furnishings. 

HPD-2270 / HPD-2275
Critical Thinking for Interior Designers I and II
Two semesters: 3 humanities and sciences credits per semester
These courses will examine the forces in the world that act on design and designers. Through a series of lectures and case studies we will examine practitioners who work within current cultural conditions. Students will employ critical thinking skills and begin to define a personal value system as design professionals. Research tools such as human behavior models of Edward Hall’s proxemics and anthropometrics, analysis of current events and cultural trends and hands-on workshops will lead to a series of artifacts that underscore the analytical role of a creative practitioner. 

IDD-2341
Introduction to Rhino and Digital Fabrication Concepts
One semester: 2 studio credits
The basics of Rhino 3D modeling software, within the context of digital fabrication, will be the focus of this course. In addition to exploring Rhino and its plug-ins, a brief overview of SketchUp will be given. Current practices in digital fabrication will be examined, with an emphasis on applications for interior design. This course prepares students for advanced machinery, such as laser cutters, 3D printers and CNC mills. 

IDD-2344
Introduction to Revit: Building Information Models for Interior Designers and Architects
One semester: 2 studio credits
Students will learn the basics of Autodesk Revit and be introduced to the tools and concepts of working with a parametric building modeler for interior and architectural designs. The course will focus on creating a model in Revit using typical design phases. 

IDD-3020
Design Studio III
One semester: 3 studio credits
This course will present projects that one is likely to encounter in a diverse design practice, including those for special populations. We will explore space and uses of geometry, and emphasis will be given to using models and perspective as tools with which to explore space. Students will employ a variety of drawing techniques to represent their ideas and designs, including hand sketches, hand-drafted plans, AutoCAD and other computer programs. Building codes, universal and sustainable design will be incorporated into class projects. 

IDD-3025
Design Studio IV
One semester: 3 studio credits
A continuation of IDD-3020, Design Studio III, this course will further develop hand- and computer-based drawing and drafting techniques for a variety of interior projects. Interior design and behavioral science course materials will be integrated. 

IDD-3030
Lighting and Specialty Design
One semester: 3 studio credits
This course will explore techniques and concepts in lighting design—lamps, luminaries, and light and color theory, as well as the accompanying psychological, emotional and aesthetic effects of light and color. Students will complete a lighting design project that includes the use of architectural drafting to prepare a reflected-ceiling plan and lighting fixtures, as well as project scheduling and costs. Other specialty areas of design, including audiovisual, telecommunications and acoustics, will be discussed. 

IDD-3130 / IDD-3135
Lecture Series V and VI: Inside the Box
Two semesters: no credit
Students will attend lectures and events offered through the Interior Design Department and professional interior design organizations in New York City. 

IDD-3150
Sustainable Design
One semester: 3 studio credits
Sustainable design is an important strategy in today’s design of the built environment, and clients are embracing it as part of their business models and mission statements. This course is geared toward the study of sustainable design strategy as good practice and as related to LEED (Leadership in Energy and Environmental Design). Through case studies (in both the public and private sectors) and class projects, students will explore sustainable environmental design. 

AHD-3360
Modern and Contemporary Interiors
One semester: 3 art history credits
The richness and diversity of design in interiors, furniture and the decorative arts from the beginning of the modern movement in the 19th century to present will be explored in this course. Topics will include: the Bauhaus, International Style, Art Deco, modern and postmodern (1950s and 1960s). 

AHD-3370
Influences in Contemporary Interiors
One semester: 3 art history credits
This course will address and clarify the influences contributing to the interiors of today and the theoretical and practical sources of inspiration that have formed the structure of today’s dynamic design. 

IDD-4010
Design Studio V: Thesis
One semester: 3 studio credits
Design Studio V is the first part of a two-semester thesis project in interior design, which utilizes and incorporates the knowledge, experience and skills from previous academic studies. Each project will be unique and will be selected by each student and approved by thesis faculty. 

IDD-4015
Design Studio VI: Thesis/Portfolio
One semester: 3 studio credits
A continuation of IDD-4010, Design Studio V: Thesis, this semester will include revisions and design developments to complete the thesis portfolio. This course will culminate in a juried presentation to visiting industry professionals and include a gallery exhibition of projects for the professional and academic interior design community. 

IDD-4030
Interior Design: Professional Practice
One semester: 3 studio credits
Professional Practice will explore the nature of the client-designer relationship with special attention to providing marketable skills that clients are interested in procuring. Mutual expectations are identified, along with developing a working knowledge of standard forms of agreement. We will cover the resources necessary to provide services, such as office organization; managing people, time and money, and recognizing social styles of interaction. This course will emphasize the importance of communication and professionalism. 

IDD-4040
Practical Applications for the Interior Design Professional
One semester: 3 studio credits
Opportunities are almost unlimited for interior designers who differentiate themselves in today’s world of innovation and competitive advantage. In this course, students will be exposed to what it takes to be competitive within the interior design and building industries. What does it mean to be a professional? Guest speakers will assist in discussion of available job and career options in interior design and related fields. Students will prepare both short- and long-term strategies for achieving a personal career plan. They will also prepare portfolios, resumes, introduction letters, etc., in order to be ready to enter the job market. 

IDD-4130 / IDD-4135
Lecture Series VII and VIII: Inside the Box
Two semesters: no credit
Students will attend lectures and events offered through the Interior Design Department and professional interior design organizations in New York City. 

Interior Design Studio Electives

 IDD-3381
Introduction to Rhino and Digital Fabrication Concepts

One semester: 3 studio credits
The basics of Rhino 3D modeling software, within the context of digital fabrication, will be the focus of this course. In addition to exploring Rhino and its plug-ins, a brief overview of SketchUp will be given. Current practices in digital fabrication will be examined, with an emphasis on applications for interior design. This course prepares students for advanced machinery, such as laser cutters, 3D printers and CNC mills. 

IDD-3384
Introduction to Revit: Building Information Models for Interior Designers and Architects
One semester: 3 studio credits
Students will learn the basics of Autodesk Revit and be introduced to the tools and concepts of working with a parametric building modeler for interior and architectural designs. The course will focus on creating a model in Revit using typical design phases. 

IDD-3412
Design Visualization
One semester: 3 studio credits
This course will explore the 3D visualization programs and skills essential to the development and presentation of advanced projects. We will focus on building one model throughout the semester to become familiar with using Autodesk 3ds Max as a tool. The basics of modeling, lighting, materials and rendering will be covered. 

IDD-3413
Advanced Design Visualization
One semester: 3 studio credits
This course is designed to help students communicate their architectural designs by exploring advanced rendering techniques using the V-Ray rendering engine, camera matching, and compositing Photoshop. Emphasis will be placed on production workflow setting up an efficient production pipeline consisting of AutoCAD, Autodesk 3ds Max, V-Ray and Adobe Photoshop.

IDD-3437
Introduction to Interior Photography
One semester: 3 studio credits
Introduction to Interior Photography is a comprehensive overview of the history of photography specific to interiors and the technical strategies used in photographing them. Lectures will focus on the work and techniques of master photographers such as Ezra Stoller, Julius Shulman and Joseph Molitor, as well as contemporary photographers such as James Casebere. The relationship between the subject of the photographs—actual interiors—and the resulting photographic images will be studied to determine how three-dimensional interior designs are visually understood in a two-dimensional format. Technical workshops will explore the strategies for photographing interiors with a focus on view angles, lighting, spatial perception and color. Students will attend a photo shoot on location in New York City to learn about decisions that get made in the field in order to create a successful image. Some lab time is included for learning about cataloging and editing photographs in Adobe Lightroom and Photoshop. 

IDD-3451
Introduction to Set Design
One semester: 3 studio credits
Introduction to Set Design is a hands-on design/build experience with an emphasis on interior scenes. Knowledge of set design is useful in the hospitality design industry where full-scale model rooms or components, such as closets, are often built before constructing a hotel to test the space for usability and visual effects. Similarly, in restaurant design a complete table setting with adjacent furniture and lighting is mocked up at the design development stage prior to construction. In this course students will study the methods and materials to make temporary interior structures, and learn about the integrity of materials. There will be demonstrations of various techniques for building sets; students will explore useful materials for light construction to will produce finished pieces at full scale. Sessions will be held in a fabrication lab. 

IDD-3513
Design/Build
One semester: 3 studio credits
This course will introduce design/build practices and digital fabrication through hands-on methodology. Students will design and build models and mock-up small-scale prototypes, as well as construct a series of individual projects using a variety of materials and machines to achieve their vision. Lectures, demonstrations and site visits will examine fabrication methodologies and how design/build has been integrated into the interior design industry. 

Internship
One semester: 3 studio credits
Students can gain valuable experience and broaden their professional network through an internship with an employer. Internships-for-credit are available to juniors and seniors who have earned a cumulative grade point average of 3.25 or better. To receive credit, students must apply online during the designated application period, be approved by the Career Development Office, and registered for the internship by their academic advisor. Students need to work 150 hours during the semester (usually 10 to 15 hours per week), participate in a weekly online course with other SVA interns, and complete midterm and final self-evaluations. Elective studio credit is awarded for the successful completion of an internship. For more information go to sva.edu/career.

 

School of Visual Arts | 209 East 23 Street, NY, NY 10010-3994 | Tel: 212.592.2000 | Fax: 212.725.3587